Lamp / ECG Configurator
Which lamp fits which ECG? Our lamp/ECG configurator will tell.
Read moreBenefits of using electronic control gears for compact fluorescent lamps
Optimum lamp performance and efficiency with QUICKTRONIC
| High efficiency as compared to low-loss ballast systems | |||||||||||||||
| Efficient, high-frequency lamp operation combined with noticeable reduction of control gear losses | |||||||||||||||
|
| Up to 50 % longer lamp life as compared to operation on low-loss ballasts |
| Less electrode wear and less greying due to high-frequency operation. |
| rel. luminous flux in % lighting hours by the thousand
Service life by the thousand
|
| Increase of lamp life (at 80 % of the system's luminous flux) from 6,000 hours to 9,000 hours. Under IEC 3-hour switching cycle (165 min ON / 15 min OFF) |
| High number of switching cycles possible |
| Optimised preheated lamp start |
| Medium duration in hours Number of switching cycles
|
| Ignition reliability will be up to 5× higher as compared to low-loss systems due to optimised preheated lamp ignition. |
| Reliable lamp ignition at low temperatures |
| Typical ignition temperatures when operated on QUICKTRONIC QT-M 1×26-42/230-240 S |
| Ignition lamps (%) Ambient temperature (°C) |
| Reliable ignition down to -25 °C |
