Pictograms for the safety requirements

Picture

The following pictograms will be used on our products, packagings or enclosing product notes and will support the directive on product safety1).
 



Open and read the instructions


Read attached instructions before use
Keep out of reach of children Hold base of lamp when fitting, not bulb
Do not touch with bare fingers Do not touch with bare fingers
No operation of lamps with scratched or damaged glass bulb No operation allowed with broken outer envelope
Lamps with operating position limitations - only cap-down to horizontal operation is permitted No disposal of as household waste
For indoor use only Disconnect from power supply before re-lamping
Disconnect electronic device from power supply before servicing Switch off light before changing the lamp
Self shielded lamp - can be operated in liminaires without protective shield Operation only in luminaire installations with protective shield
Non-dimming Beware of temperature
For removal and installation use appropriate gloves For removal and installation use appropriate eye protection
Protect against direct water contact Dichroic-coated reflector lamps - use only in suitable installations
Bowl mirror lamp - use only in suitable installations Operating position limitations:
p = horizontal,
h = cap-up,
s = cap-down,
15 = ± 15°
Installation and servicing of electronic device only by qualified electrical employees Lamp emits a high level of UV radiation
Germicidial lamp Radiation hazard
Operation only with appropriate control gear Lamps having an internal starting device
Lamps require an external ignitor Dangerous voltage